Rows of chairs and an aisle look simple until you try to fit 120 people into a room with one door, a fire exit and a registrar who needs a table. Here are the numbers that make a ceremony work, a chart from 50 to 300 guests, and a layout for each that opens in 3D.
Two blocks of chairs face the front with an aisle between them. The aisle starts at the door the bride comes in by and ends a few metres short of the front row, where the two of you stand. Behind you is the arch, the chuppah or the mandap, and in a civil ceremony the registrar's table.
Everything else follows from that line. If the main door is on a long wall, the aisle usually runs across the room, and you get short, wide rows. If it's on an end wall, the aisle runs down the length and the rows get longer and fewer.
The numbers
Aisle: at least 1.2 m wide. That's two people side by side, plus a dress. 1.5 m feels generous and leaves room for petals at the row ends.
Rows: about 0.95 m apart, back of chair to back of chair. Below 0.85 m people squeeze past knees to get to their seats.
Chairs: 0.55 m each in a row (a standard folding or chiavari chair plus a little elbow room).
No more than about 10 chairs from the aisle. Longer rows are slow to fill and the people at the far end see the backs of heads.
A walkway of 1.2 m down each side and across the back, for late arrivals, the photographer and anyone who needs to step out.
About 3 m at the front between the front row and the arch, for the two of you, the registrar or officiant and someone giving a reading.
Doors and fire exits clear: keep 1.2 m free in front of each, and never put a row across a fire exit.
Reserved rows at the front for close family: usually one row for under 60 guests and two for bigger weddings.
Ceremony seating by guest count
Rows and chairs come from the same rules the planner uses to lay out a Ceremony, and the room size is the smallest the planner could fit that ceremony into, aisle from the main doors, with no layout warnings. Each Open it link opens that layout in 3D so you can move things around.
Ceremony seating by guest count, with an arch and signing table at the front
A wedding over 200 often works better as two aisles and three blocks of chairs, so no row is longer than about eight. Copy the seating block in the planner and set each one's chairs per side.
Check it from the door
Most ceremony mistakes only show at eye level: a pillar in front of the second row, a window behind the arch that turns the two of you into silhouettes in the photos, or an aisle that starts at a fire door nobody can open.
In the planner, set the light to the time of your ceremony and stand at the entrance, which is where your guests will be looking from. Then sit in the back row.
With a chuppah
A chuppah is a stage as well as a backdrop. The two of you, the rabbi or officiant and often both sets of parents stand under or beside it, so it needs more room than an arch: a 2.4 m square canopy takes about 4 m from the front row to the wall behind it. Leave a clear way round the back for the people who'll stand there.
A mandap is bigger again (3.6 m square in the planner, often on a raised stage), and a Hindu ceremony runs longer than most, so guests come and go. Wider walkways and a clear route to the back matter more. The mandap layout guide covers mandap sizes, the stage, the fire and fusion ceremonies.
Same room for the ceremony and the wedding breakfast?
Plenty of venues turn the room round while you're having drinks and photos. That takes an hour or more, and it goes faster when the staff know exactly what moves where. Plan both in the same drawing of your room: the rows that go, the tables that come in, and what stays put (the arch can stay as a backdrop for the top table). The Wedding Pass adds Ceremony, Wedding breakfast and Evening scenes to one layout, shows the turnaround between them, and prints it as a checklist for the venue. The room turnaround guide covers timings and how to make it quick.
Holding the ceremony outdoors? Lay it out in the garden or on the lawn, then do it again in the indoor room as the wet-weather plan, so you know both work.
Questions
How wide should a wedding aisle be?
At least 1.2 m, so two people can walk side by side with room for the dress. 1.5 m feels generous and leaves space for petals or an aisle runner.
How far apart should ceremony rows be?
About 0.95 m from the back of one row to the back of the next. Below 0.85 m guests have to squeeze past knees to reach their seats.
How much space do I need for a ceremony of 100 guests?
100 guests sit in 10 rows of 5 either side of a 1.5 m aisle, a block about 7 × 9 m. With walkways down the sides, space at the back and an arch and signing table at the front, plan on a room of about 15 × 9.5 m. The chart above has 50 to 300.
Where does the registrar's table go?
Usually just in front of the arch, between it and the two of you, with room behind it for the registrar to stand. Ask your registrar or the venue: some have a fixed spot, and the table has to be somewhere the signing can be photographed.
Your ceremony, to scale. Load your venue's floor plan, trace the walls and doors, and add Ceremony seating from the Ceremony group: set the rows, chairs per side, aisle and reserved rows, and the planner warns you about tight rows, a narrow aisle or a blocked exit.