Draw your venue to scale from the floor plan they sent you, lay out the tables, top table, dance floor and bar, and walk round it in 3D before the day. The planner checks the spacing as you go, so you know it fits before you book the hire. Free to start, in your browser, no account needed.
Load the venue's floor plan as a tracing image, set the scale from one wall, and click round the corners. Type an exact length for any wall you've measured. Then add the doors (and which ones are fire exits), the windows, pillars, a stage or a fireplace, exactly where they are.
Odd shapes are fine: L-shaped rooms, cut corners, a marquee with rounded ends, a terrace with a cut corner.
Lay it out, with the checks on
Drag in round tables and trestles at real hire sizes, the top table or a sweetheart table, the dance floor, bars, buffet, cake and cards tables, a DJ or band, a photo booth and ceremony rows. Snapping guides line them up.
The checks watch the rules of thumb venues use: about 1.5 m between tables, 1.2 m walkways, 1.2 m clear in front of every door, a fire exit nobody has to squeeze past, and a dance floor big enough for your guest count.
Then see it in 3D
The same room in 3D, in your theme, by daylight, golden hour or candlelight. Walk in through the door your guests will use, sit at the back table, and look at the top table from there. Then paste in your guest list and seat everyone on the plan.
Send your family or the venue coordinator a link: it opens on their phone in 3D, no app or account needed.
How to get your venue's floor plan to scale
Everything after this depends on the room being the right size, so it's worth twenty minutes.
Ask the venue for their floor plan. Most have a PDF in the wedding pack, or the one their caterer or marquee company uses. Ask for the version with measurements if there is one.
Load it as a tracing image. In the planner, choose Draw your venue and upload the PDF, JPG or PNG. If the PDF has several pages, pick the one with the plan. A photo of a printed plan works if you take it straight on.
Set the scale from one wall you know. Click both ends of the longest wall with a known length and type it in. The longest wall gives the smallest error: a centimetre out over 20 m is nothing; over 2 m it's a lot.
Draw the walls over it. Click round the corners, then fix any wall you've measured by typing its exact length.
Add what's fixed. Doors, and which of them are fire exits; windows; pillars; a stage or a fireplace, and anything else the venue won't move. These decide where the tables can go far more than the walls do.
Check the size. The planner shows the room's area. Compare it with the venue's own figure, or measure one wall at your next visit. If they differ, the scale is out: set it again from a longer wall.
No floor plan? Measure it at a viewing. A laser measure is quickest; pacing works for a first go. Measure the long walls, the width at each end, and where the doors and pillars are, then draw it with those lengths typed in.
Or start from a venue like yours
Each template is a real-sized room, laid out and checked, ready to change to fit yours.
Planning is free and needs no account: draw your venue, lay out the room in five themes, seat up to 20 guests, walk round it in 3D and send a link. The Wedding Pass is one payment for your wedding, not a subscription. It adds coming back to keep editing on any device, your whole guest list seated, the ceremony and evening as well as the wedding breakfast, more themes and statement pieces, and the prints: a measured plan for the venue, the table plan board, and place and escort cards.
Questions
Is it free?
Planning is free and needs no account: draw your venue, lay out the room, seat up to 20 guests, walk round it in 3D and send a link. The Wedding Pass, one payment and no subscription, adds coming back to edit on any device, every guest seated, the ceremony and evening, and the prints.
What if my venue doesn't have a floor plan?
Measure the room yourself: a laser measure is quickest, or pace the walls at a viewing. Measure the longest walls, note where the doors, fire exits, windows and pillars are, and draw it with the exact lengths typed in.
Which files can I trace over?
A PDF (you pick the page), JPG, PNG, WebP or GIF. A photo of a printed plan works too, as long as it's taken straight on.
Does it work on a phone or iPad?
Yes. A laptop is easiest for drawing walls over a floor plan; a phone or iPad is good for laying out, the 3D view and showing people.
Can I share it with my venue?
Send a link and it opens in 3D in their browser. With the Wedding Pass you can also print a measured plan with every wall length and a scale bar.
Have the floor plan to hand? It takes about twenty minutes to draw your venue, and you'll use it for every decision after: tables, the dance floor, the ceremony and the seating.