Planning guide

Mandap layout for an Indian wedding

The mandap is the center of the day, and it takes more room than people expect: the stage, the fire, the pheras, a family on the steps and a few hundred guests who need to see all of it. Here's how much space it all takes, with a seating chart from 50 to 300 guests and a layout for each that opens in 3D.

Eye level from the ballroom doors: a long white aisle between rows of gold chiavari chairs leads to a mandap with marigold garlands, under crystal chandeliers

The mandap and its stage

Size. Rental mandaps run from about 10 × 10 ft to 20 × 20 ft. 12 × 12 ft is a common size: room for the two of you, the priest and the fire, with space to walk the pheras around it. Go to 16 × 16 ft or more if both sets of parents sit inside with you, or if your family wants room for relatives to gather around for the photos.

The stage. Much of the ceremony happens seated, so the mandap usually stands on a stage 1 to 2 ft high to let the back rows see. Allow a few feet of stage around the mandap, and steps at the front. The stage, not the mandap, is what you're fitting into the room.

Which way it faces. Some families want the couple facing east during the ceremony. Ask your priest early, because it decides which wall the mandap goes against, and so where the aisle and the entrance are.

The aisle and the entrances

Seating by guest count

Rows of chairs either side of a center aisle, with a 12 ft mandap at the front. The space is the smallest the planner could fit that ceremony into, aisle from the main entrance and every exit clear. Each Open it link opens that layout in 3D. Change the room to your venue's size and the planner tells you if anything stops fitting.

Ceremony seating by guest count, with a mandap at the front
GuestsRowsChairs each sideSeating blockRoom for the ceremonyIn 3D
505523 × 14 ft39 × 31 ftOpen it →
758523 × 24 ft48 × 31 ftOpen it →
10010523 × 30 ft54 × 31 ftOpen it →
15011730 × 33 ft57 × 39 ftOpen it →
200101041 × 30 ft54 × 49 ftOpen it →
25014937 × 42 ft67 × 46 ftOpen it →
300151041 × 45 ft71 × 49 ftOpen it →

A stage adds to these sizes: measure it, then set the mandap's width and depth in the planner to the size of the stage so the space around it stays honest.

The ballroom from above in 3D by evening: the mandap against the far wall, two blocks of chairs either side of the aisle running from the main doors

The fire

The sacred fire sits at the center of the mandap. Outdoors that's simple; indoors, ask the venue as soon as you book. Many allow a small, contained havan with notice and a fire extinguisher nearby. Some have their own staff cover or switch off the smoke detectors over the mandap for the ceremony, and some only allow a lamp or a symbolic flame. Their answer can decide which room you use.

Keep the mandap clear of low ceilings, drapes and hanging flowers above the fire, and leave a clear path from the mandap to an exit.

A barn set up for a second ceremony: a white chuppah on four poles, rows of chairs facing it

Fusion weddings: two ceremonies

A Hindu ceremony and a Christian or Jewish one on the same day is common, and the question is always whether to use one room or two. Three ways to do it:

  • Two rooms or one room and the garden. Simplest for the venue, but guests move between them.
  • One room, flipped. The mandap comes out and the arch or chuppah goes in while guests have drinks. Plan both setups in the same drawing so the staff know what moves.
  • One room, both up. The mandap and the arch or chuppah side by side at the front, and the same chairs for both ceremonies. It needs a wide room: the two front pieces plus the space between them.

In the planner, the Ceremony group has a mandap, a chuppah and several arches. The Wedding Pass adds separate scenes for each ceremony and the reception in one layout, with the room flip between them.

The rest of the day

The reception often moves into the same ballroom, with a sangeet or a dance floor big enough for everyone. The tables by guest count pages and the dance floor calculator size it, and the ceremony seating guide covers the general rules for rows and aisles.

Questions

What size mandap do I need?

12 by 12 feet is a common size: room for the two of you, the priest and the fire, with space to walk the pheras. Go to 16 by 16 feet or more if parents sit inside with you, or if the mandap stands on a stage that needs steps and a margin around it.

How much space do I need for an Indian wedding ceremony of 150 guests?

150 guests fit in 11 rows of 7 on each side of a 5-foot aisle. With a 12-foot mandap, space around it, side aisles and room at the back, plan on about 57 by 39 feet. The chart above runs from 50 to 300.

Can you have a fire in the mandap indoors?

Often, but ask the venue early. Many allow a small, contained havan with notice and a fire extinguisher nearby; some need the smoke detectors covered by their own staff, and some only allow a lamp or a symbolic flame.

Do guests have to sit in rows?

No. Rows facing the mandap give everyone the best view, but some families seat guests at round tables for the ceremony and stay put for lunch, or put elders in armchairs and sofas at the front. Lay out each option in the planner and look at the mandap from the back row in 3D before you decide.

Your mandap, in your venue. Load the venue's floor plan, trace the walls, then add the mandap and ceremony seating from the Ceremony group. Walk up the aisle in 3D, by daylight or by evening, and share it with your family and the decorator.

Draw your venue